Products

Service Fire Doors

Cookson - “The Fire Door Specialists”

Reliability
Dependable automatic closings because of simplicity of design.

Durability
Our designs have eliminated impact of release mechanism parts to assure years of frequent testing without costly maintenance or repair.

Value
Cookson Fire Doors are the most effective way of protecting property while increasing safety for building occupants.

Purpose of a Fire Door

Protect property by limiting damage in case of fire.
Make a building safer to occupy.
Close an opening in a fire wall.

Fire Door Actuation

In order to limit damage caused by fire, The Cookson Company recommends that all fire doors be actuated by smoke detectors or building alarm systems. All of Cookson’s Fire Door Products Systems have been specifically designed for smoke detector or building alarm actuation.

Service Fire Door
Photo Album

Cookson Leads in Fire Door Technology

The Cookson Auto-Test FDO-B Motor Operated Fire Door System, offers maximum reliability and durability at a cost effective price - “The Talking Fire Door”.

Fully automatic resetting fire door.

Test key switch makes it easy to test door.

Voice module announces door closing during test or alarm activation, advising building occupants that the fire door will be closing.

Visible and audible speaker strobe light warning device activates at the beginning of a test or alarm while the voice module announcement is sounding.

Built-in battery prevents door closing during power failure unless there is an alarm activation.

During power failure, the door can be closed and stopped using the close control switch.

Soft-Close RPM governing system limits closing speed to 9" per second.

A Fire Door for Every Occasion:

Lifetime warranted Whisper Governor controls automatic closing speed of door to a range of 6" to 2' per second (used on all doors except Auto-Test model FDO-B)
Oil tempered torsion springs designed for 50,000 life cycles
Structural Angle Guides and Bottom Bar make doors less vulnerable to damage that could prevent the doors from fully closing
Approved in all sizes Labeled doors up to 163 square feet not exceeding 13'-6" wide or 12'-0" high Oversize labels furnished on larger doors not exceeding 36'-6" wide or 24'-0" high
Available for 4 hour, 3 hour, 1-1/2 hour and 3/4 hour ratings
Approved for all wall types (concrete, masonry, structural steel, structural steel with gypsum board)
Simple-Test Doors are reset from one side of opening reducing testing costs
Sure-Close release spring on Simple-Test Doors increase reliability of automatic closings
Auto-Test Doors do not require resetting
Testing doors in fully closed position will not damage mechanisms
Revolutionary Soft-Close RPM governing system limits automatic closing speed to a range of 6" to 9" per second (only available on Auto-Test model FDO-B)
FinalCote finish

^ Back to Top ^